design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors (smd type) 22 fp j capacitance (f) series identi?cation lot number negative polarity marking (C) rated voltage code mark for lead-free products (black dot) a0.2 w ( ) reference size l 0 d0.5 h b0.2 (i) k (p) (i) + C 0.3 max. pressure relief ( 0 10 and larger) frequency correction factor for ripple current low esr (30 % to 50 % less than fk series) endurance : 105 c 2000 h vibration-proof product is available upon request. (08 mm and larger) rohs compliant features specifi cations dimensions marking surface mount type series : fp type : v high temperature lead-free refl ow (suffix : a ? ) example : 6.3 v.dc 22 f marking color : black category temperature range C55 c to +105 c rated voltage range 6.3 v.dc to 50 v.dc capacitance range 10 f to 1800 f capacitance tolerance 20 % (120 hz/+20 c) leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) dissipation factor (tan d ) please see the attached characteristics list characteristics at low temperature v.dc 6.3 10 16 25 35 50 (impedance ratio at 120 hz) z(C25 c)/z(+20 c) 222222 z(C40c)/z(+20 c) 333333 z(C55c)/z(+20 c) 444333 endurance after applying rated working voltage at +105 c 2 c for 2000 hours the capacitors shall meet the limits speci? ed below. post-test requirement at +20 c capacitance change within 30 % of the initial value tan d < 200 % of the initial limit dc leakege current within the initial limit shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) resistance to soldering heat after re? ow soldering and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change within 10 % of the initial value tan d within the initial limit dc leakage current within the initial limit aec-q200 aec-q200 compliant size code 0 d l a, b h i w p k b 4.0 5.80.30 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 - 0.20 c 5.0 5.80.30 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 - 0.20 d 6.3 5.80.30 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 d8 6.3 7.70.30 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 e 8.0 6.20.30 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 - 0.20 f 8.0 10.20.30 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.20 g 10.0 10.20.30 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.20 + 0.15 + 0.15 + 0.15 + 0.15 + 0.15 frequency (hz) capacitance (f) 120 1 k 10 k 100 k to 10 to 470 0.65 0.85 0.95 1.00 560 to 1800 0.75 0.90 0.95 1.00 (unit : mm) r. voltage (v.dc) 6.3 10 16 25 35 50 code jacevh mar. 2016 02
design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors (smd type) endurance : 105 c 2000 h rated voltage (v.dc) cap. (20 %) (f) case size (mm) size ? code speci? cation part no. re? ow min. packaging q'ty 0 dl ripple current (100 khz) (+105 c) (ma r.m.s.) esr (100 khz) (+20 c) ( ) tan d (120 hz) (+20 c) taping (pcs) 6.3 22 4 5.8 b 160 0.85 0.26 eeefp0j220ar (5) 2000 47 4 5.8 (b) 160 0.85 0.26 eeefpj470uar (5) 2000 5 5.8 c 240 0.36 0.26 eeefp0j470ar (5) 1000 100 5 5.8 (c) 240 0.36 0.26 eeefpj101uar (5) 1000 6.3 5.8 d 300 0.26 0.26 eeefp0j101ap (5) 1000 220 6.3 5.8 d 300 0.26 0.26 eeefp0j221ap (5) 1000 330 6.3 7.7 d8 600 0.16 0.26 eeefpj331xap (5) 900 8 6.2 e 500 0.18 0.26 eeefp0j331ap (6) 1000 470 8 10.2 f 850 0.08 0.26 eeefp0j471ap (6) 500 1000 8 10.2 f 850 0.08 0.26 eeefp0j102ap (6) 500 1500 10 10.2 g 1190 0.06 0.26 eeefp0j152ap (6) 500 1800 10 10.2 (g) 850 0.08 0.26 eeefpj182uap (6) 500 10 22 4 5.8 b 160 0.85 0.19 eeefp1a220ar (5) 2000 33 4 5.8 (b) 160 0.85 0.19 eeefpa330uar (5) 2000 5 5.8 c 240 0.36 0.19 eeefp1a330ar (5) 1000 150 6.3 5.8 d 300 0.26 0.19 eeefp1a151ap (5) 1000 220 6 . 3 7.7 d 8 6 0 0 0.16 0.19 eeefpa221xap (5) 900 8 6.2 e 500 0.18 0.19 eeefp1a221ap (6) 1000 330 8 10.2 f 850 0.08 0.19 eeefp1a331ap (6) 500 470 8 10.2 f 850 0.08 0.19 eeefp1a471ap (6) 500 680 8 10.2 f 850 0.08 0.19 eeefp1a681ap (6) 500 1000 10 10.2 g 1190 0.06 0.19 eeefp1a102ap (6) 500 1200 10 10.2 (g) 850 0.08 0.19 eeefpa122uap (6) 500 16 10 4 5.8 b 160 0.85 0.16 eeefp1c100ar (5) 2000 22 4 5.8 (b) 160 0.85 0.16 eeefpc220uar (5) 2000 5 5.8 c 240 0.36 0.16 eeefp1c220ar (5) 1000 47 5 5.8 (c) 240 0.36 0.16 eeefpc470uar (5) 1000 6.3 5.8 d 300 0.26 0.16 eeefp1c470ap (5) 1000 68 6.3 5.8 d 300 0.26 0.16 eeefp1c680ap (5) 1000 100 6.3 5.8 d 300 0.26 0.16 eeefp1c101ap (5) 1000 6 . 3 7.7 d 8 6 0 0 0.16 0.16 eeefpc101xap (5) 900 15 0 6 . 3 7.7 d 8 6 0 0 0.16 0.16 eeefpc151xap (5) 900 220 6 . 3 7.7 d 8 6 0 0 0.16 0.16 eeefpc221xap (5) 900 8 6.2 e 500 0.18 0.16 eeefp1c221ap (6) 1000 330 8 10.2 f 850 0.08 0.16 eeefp1c331ap (6) 500 470 8 10.2 f 850 0.08 0.16 eeefp1c471ap (6) 500 680 10 10.2 g 1190 0.06 0.16 eeefp1c681ap (6) 500 820 10 10.2 (g) 850 0.08 0.16 EEEFPC821UAP (6) 500 25 10 4 5.8 b 160 0.85 0.14 eeefp1e100ar (5) 2000 22 5 5.8 c 240 0.36 0.14 eeefp1e220ar (5) 1000 33 5 5.8 (c) 240 0.36 0.14 eeefpe330uar (5) 1000 6.3 5.8 d 300 0.26 0.14 eeefp1e330ap (5) 1000 47 6.3 5.8 d 300 0.26 0.14 eeefp1e470ap (5) 1000 68 6.3 5.8 d 300 0.26 0.14 eeefp1e680ap (5) 1000 100 6 . 3 7.7 d 8 6 0 0 0.16 0.14 eeefpe101xap (5) 900 8 6.2 e 500 0.18 0.14 eeefp1e101ap (6) 1000 150 8 10.2 f 850 0.08 0.14 eeefp1e151ap (6) 500 220 8 10.2 f 850 0.08 0.14 eeefp1e221ap (6) 500 330 8 10.2 f 850 0.08 0.14 eeefp1e331ap (6) 500 470 10 10.2 g 1190 0.06 0.14 eeefp1e471ap (6) 500 560 10 10.2 (g) 850 0.08 0.14 eeefpe561uap (6) 500 ? size code( ) : miniaturization product if part number exceeds 12 digits, voltage code is abbreviated as follows; 0j j, 1a a, 1c c, 1e e, 1v v please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p characteristics list mar. 2016 02
design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors (smd type) endurance : 105 c 2000 h ? size code( ) : miniaturization product if part number exceeds 12 digits, voltage code is abbreviated as follows; 0j j, 1a a, 1c c, 1e e, 1v v please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p rated voltage (v.dc) cap. (20 %) (f) case size (mm) size ? code speci? cation part no. re? ow min. packaging q'ty 0 dl ripple current (100 khz) (+105 c) (ma r.m.s.) esr (100 khz) (+20 c) ( ) tan d (120 hz) (+20 c) taping (pcs) 35 10 4 5.8 (b) 160 0.85 0.12 eeefpv100uar (5) 2000 22 5 5.8 c 240 0.36 0.12 eeefp1v220ar (5) 1000 33 6.3 5.8 d 300 0.26 0.12 eeefp1v330ap (5) 1000 47 6.3 5.8 d 300 0.26 0.12 eeefp1v470ap (5) 1000 6 8 6 . 3 7.7 d 8 6 0 0 0.16 0.12 eeefpv680xap (5) 900 100 6 . 3 7.7 d 8 6 0 0 0.16 0.12 eeefpv101xap (5) 900 8 10.2 f 850 0.08 0.12 eeefp1v101ap (6) 500 150 8 10.2 f 850 0.08 0.12 eeefp1v151ap (6) 500 220 8 10.2 f 850 0.08 0.12 eeefp1v221ap (6) 500 330 10 10.2 g 1190 0.06 0.12 eeefp1v331ap (6) 500 390 10 10.2 (g) 850 0.08 0.12 eeefpv391uap (6) 500 50 10 0 8 10. 2 f 670 0.18 0.10 eeefp1h101ap (6) 500 220 10 10.2 g 900 0.12 0.10 eeefp1h221ap (6) 500 characteristics list mar. 2016 02
|
